Interface Terminal Blocks (Round/Y Terminal Types)（Representative Standard：CUL）

• You can add up to 6 items per a category to the compare list. Compare

  

  Terminal Block, PCN7 Series

  TOYOGIKEN

  An ultra small size with a pitch between terminals of just 7 mm. Ideal for size reducing PLC or SBC interfaces. A compact type for helping reduce the size of control panels.[Features]· An ultra small size with a pitch between terminals of just 7 mm.· Ideal for size reducing PLC or SBC interfaces.· A compact type for helping reduce the size of control panels.· The connector and terminal block are easy-to-handle 1:1 wire connection types.· Uses SS terminal screws for easy wiring.· Structured to prevent screws from dropping out and becoming lost.· The terminal is an open/close type and is pre-equipped with a name plate featuring the terminal number on both sides. Designed for greater efficiency during wiring.· Compatible with both DNI rail mounting and direct mounting methods.

  • Volume Discount

  CAD ：

  2D

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector / Other	M3	20 ～ 50	DIN rail/Direct attachment	7	PLC / I/O board	Mitsubishi Electric / Omron / KEYENCE	CUL	40	80 ～ 184	36 ～ 36.8

  From: 2,689 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MWI Series (Pitch between terminals 7 mm)

  MISUMI

  Terminal block with selectable MIL socket connector name plate

  • Volume Discount

  • c-UL
  • Space-saving
  • Sensor
  • PLC
  • 125 V

  CAD ：

  2D

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  MIL Connector	M3	20 ～ 40	DIN rail/Direct attachment	7	PLC	Mitsubishi Electric / Omron / KEYENCE	CUL	41.5	80 ～ 150	42.5

  From: 2,295 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Terminal Block, PCN Series

  TOYOGIKEN

  [Features]· The width of the main body is 40 mm in comparison to a DIN rail width of 35 mm.· Boasts an even slimmer finish.· The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.· The terminal number and connector number are wired 1-to-1.· Circuits can be freely designed.· Improves workability when using new screw types.· If using a fork type terminal, the PCN series is without doubt the most effective option.· A lever type which enables neat and tidy removal from rails.· No tools required for removal, and so no need for wasted space on the backside of the main body.· Compatible with both rail mounting and direct mounting.

  • Volume Discount

  CAD ：

  2D

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector / Other	M3	20 ～ 50	DIN rail/Direct attachment	7.62	Other	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	CUL	40	86 ～ 200	36 ～ 36.8

  From: 2,789 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block, PCI Series, Crimp Terminal Type

  TOYOGIKEN

  [Features]· The PCI series is compatible with the main Mitsubishi and OMRON sequencers (forDC5V to 24V).· A slim design with a main body width of just 40 mm. For use with 35 mm wide DIN rails.

  • Volume Discount

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector	M3	20 ～ 24	With DIN rail	7.62	PLC	Mitsubishi Electric / Omron	CUL	40	162	36 ～ 36.8

  From: 4,189 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MWI Series (Pitch between terminals 8.5 mm)

  MISUMI

  Terminal block equipped with PCR connectors that are frequently used on I/O boards

  • Volume Discount

  • c-UL
  • Crimp Terminal
  • 125 V

  CAD ：

  2D

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  Other	M3.5	68 ～ 96	DIN rail/Direct attachment	8.5	I/O board	-	CUL	64	219.55	35.5

  From: 10,973 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch

  KASUGA ELECTRIC

  Uses M3 screws and boasts the smallest pitch in the industry and just 7 mm. Designed to help improve space saving measures, even when compared with the TIFA7 series.[Features]· A slim type from the TIFA series. Available with different numbers of poles.· A product series designed for improved space saving measured. Compared with the TIFA7 series, the amount of space required for installation has been reduced by approximately 12%.· As well as self-up screw types, types which use a fall prevention screw structure that ensures the screws will not fall off, even if the terminal block is turned upside down, are also available.· The KASUGA interface terminal block is available in a number of variations for use in different applications.

  • Volume Discount

  CAD ：

  2D

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  MIL Connector	M3	20 ～ 50	DIN rail/Direct attachment	7	PLC / Servo Motor / Other	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	CUL	40	80 ～ 185	42.3

  From: 2,289 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MWI Series (Pitch between terminals 7 mm)

  MISUMI

  ● As a relay connector terminal block for AC servo motors, etc.

  • Volume Discount

  • c-UL
  • CE-Compliant
  • For Signal
  • AC Servo
  • 125 V

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  MIL Connector	M3	50	DIN rail/Direct attachment	7	Servo Motor	YASKAWA ELECTRIC / Panasonic Electronic Works	CUL	49	185	45

  From: 4,874 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  MWI Series (Ultra Small)

  MISUMI

  45 mm x 55 mm space saving connector terminal block

  • Volume Discount

  • c-UL
  • For Signal
  • Space-saving
  • Sensor
  • PLC

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  MIL Connector	M3	20	With DIN rail	7.62	PLC	Mitsubishi Electric / Omron	CUL	47	55	50

  From: 2,844 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Connector
Terminal Block Screw
Number of Poles(Pole)
Mounting Method
Pitch Between Terminals(mm)
Supported equipment
Supported equipment manufacturer
Representative Standard
Dimension vertical(mm)
Dimension width(mm)
Dimension depth(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	TOYOGIKEN	MISUMI	TOYOGIKEN	TOYOGIKEN	MISUMI	KASUGA ELECTRIC	MISUMI	MISUMI
Product SeriesDòng sản phẩm	Terminal Block, PCN7 Series	MWI Series (Pitch between terminals 7 mm)	Terminal Block, PCN Series	Connector Terminal Block, PCI Series, Crimp Terminal Type	MWI Series (Pitch between terminals 8.5 mm)	Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch	MWI Series (Pitch between terminals 7 mm)	MWI Series (Ultra Small)
CADCAD	2D	2D	2D		2D	2D
From	2,689 VND	2,295 VND	2,789 VND	4,189 VND	10,973 VND	2,289 VND	4,874 VND	2,844 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	6 Day(s) or more	Same day	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật		c-UL Space-saving Sensor PLC 125 V			c-UL Crimp Terminal 125 V		c-UL CE-Compliant For Signal AC Servo 125 V	c-UL For Signal Space-saving Sensor PLC
Connector	MIL Connector / FCN Connector / Other	MIL Connector	MIL Connector / FCN Connector / Other	MIL Connector / FCN Connector	Other	MIL Connector	MIL Connector	MIL Connector
Terminal Block Screw	M3	M3	M3	M3	M3.5	M3	M3	M3
Number of Poles(Pole)	20 ～ 50	20 ～ 40	20 ～ 50	20 ～ 24	68 ～ 96	20 ～ 50	50	20
Mounting Method	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	With DIN rail	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	With DIN rail
Pitch Between Terminals(mm)	7	7	7.62	7.62	8.5	7	7	7.62
Supported equipment	PLC / I/O board	PLC	Other	PLC	I/O board	PLC / Servo Motor / Other	Servo Motor	PLC
Supported equipment manufacturer	Mitsubishi Electric / Omron / KEYENCE	Mitsubishi Electric / Omron / KEYENCE	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	Mitsubishi Electric / Omron	-	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	YASKAWA ELECTRIC / Panasonic Electronic Works	Mitsubishi Electric / Omron
Representative Standard	CUL	CUL	CUL	CUL	CUL	CUL	CUL	CUL
Dimension vertical(mm)	40	41.5	40	40	64	40	49	47
Dimension width(mm)	80 ～ 184	80 ～ 150	86 ～ 200	162	219.55	80 ～ 185	185	55
Dimension depth(mm)	36 ～ 36.8	42.5	36 ～ 36.8	36 ～ 36.8	35.5	42.3	45	50

Loading...Tải…