Interface Terminal Blocks (Round/Y Terminal Types)（Connector：D-sub connector）

• You can add up to 6 items per a category to the compare list. Compare

  

  Terminal Block, PCN7 Series

  TOYOGIKEN

  An ultra small size with a pitch between terminals of just 7 mm. Ideal for size reducing PLC or SBC interfaces. A compact type for helping reduce the size of control panels.[Features]· An ultra small size with a pitch between terminals of just 7 mm.· Ideal for size reducing PLC or SBC interfaces.· A compact type for helping reduce the size of control panels.· The connector and terminal block are easy-to-handle 1:1 wire connection types.· Uses SS terminal screws for easy wiring.· Structured to prevent screws from dropping out and becoming lost.· The terminal is an open/close type and is pre-equipped with a name plate featuring the terminal number on both sides. Designed for greater efficiency during wiring.· Compatible with both DNI rail mounting and direct mounting methods.

  • Volume Discount

  CAD ：

  2D

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  D-sub connector	M3	25 ～ 37	DIN rail/Direct attachment	7	PLC / I/O board	Mitsubishi Electric	-	40	100 ～ 149	36

  From: 3,289 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Terminal Block, PCN Series

  TOYOGIKEN

  [Features]· The width of the main body is 40 mm in comparison to a DIN rail width of 35 mm.· Boasts an even slimmer finish.· The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.· The terminal number and connector number are wired 1-to-1.· Circuits can be freely designed.· Improves workability when using new screw types.· If using a fork type terminal, the PCN series is without doubt the most effective option.· A lever type which enables neat and tidy removal from rails.· No tools required for removal, and so no need for wasted space on the backside of the main body.· Compatible with both rail mounting and direct mounting.

  • Volume Discount

  CAD ：

  2D

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  D-sub connector	M3	25	DIN rail/Direct attachment	7.62	Other	-	-	40	109	36

  From: 3,561 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PX7DW Series Dsub Connector Terminal Block (terminal pitch: 7.62mm)

  YOSHIDADENKI

  A captive screw 1/2 space Dsub connector type.

  • Volume Discount

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  D-sub connector	M3	37	DIN rail/Direct attachment	7.62	PLC	-	UL / CSA	64	101.21	48

  From: 5,370 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MWS Series (Screw Hold Mechanism with Spring)

  MISUMI

  Screw hold mechanism with spring-type terminal block equipped with D-sub connectors

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC

  CAD ：

  2D

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  D-sub connector	M3	25 ～ 37	DIN rail/Direct attachment	7	PLC	-	-	50.7	96.5 ～ 138.5	47.6

  From: 2,615 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  MWI Series (Pitch between terminals 7 mm)

  MISUMI

  D-sub connector-equipped terminal block with 7 mm pitch between terminals

  • Volume Discount

  • For Signal
  • PLC
  • 125 V

  CAD ：

  2D

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  D-sub connector	M3	25 ～ 37	DIN rail/Direct attachment	7	PLC	Mitsubishi Electric	-	49	101 ～ 150	45

  From: 4,158 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Interface Terminal Block, Standard Type, 7 mm Pitch

  KASUGA ELECTRIC

  Uses M3 screws and boasts the smallest pitch in the industry at just 7 mm.[Features]· A standard 1-to-1 wiring connection type interface terminal block.· A space-saving design with a terminal pitch of just 7 mm. Features a horizontal width of 150 mm, even with the 40 pole type. Despite its small size, it can be used with JIS standard crimp terminals.· Types which use a fall prevention screw structure that ensures screws will not fall, even if turned upside down, are also available.· Features a terminal pitch of 8.5 mm, designed with an emphasis on workability. Ensures sufficient space between the terminal screws on the upper and lower levels, enabling the terminal screws on the lower level to be tightened after wiring.· The wiring on the lower level can also be replaced without having to remove the wiring on the upper level.· Wires of 2 mm2, one size larger than other series wires, can also be wired in case of issues such as voltage drops, etc.· Types with a terminal pitch of 3.8 mm or 5 mm and that use press-tightening screws are also available. These helps improve space saving and size-reducing measures.

  • Volume Discount

  CAD ：

  2D

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  D-sub connector	M3	37	DIN rail/Direct attachment	7	Other	Mitsubishi Electric	-	45	150	45

  From: 5,571 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  IM-DSF Dsub Female Connector Terminal Block for Control Panels

  WAGO

  [Features]● Simple to use. 1-to-1 circuit● A wide range of wire connections. A 5 mm pitch terminal block.● Industry standard. An international standard Dsub connector.● For large current applications. Convenient for 3 A energizing● Ideal for EMC audits, etc. Equipped with a shield terminal block.

  • Volume Discount

  Connector	Terminal Block Screw	Number of Poles(Pole)	Mounting Method	Pitch Between Terminals(mm)	Supported equipment	Supported equipment manufacturer	Representative Standard	Dimension vertical(mm)	Dimension width(mm)	Dimension depth(mm)
  D-sub connector	-	15 ～ 37	With DIN rail	5	-	-	-	27.1	48 ～ 102	55

  From: 4,689 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Connector
Terminal Block Screw
Number of Poles(Pole)
Mounting Method
Pitch Between Terminals(mm)
Supported equipment
Supported equipment manufacturer
Representative Standard
Dimension vertical(mm)
Dimension width(mm)
Dimension depth(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	TOYOGIKEN	TOYOGIKEN	YOSHIDADENKI	MISUMI	MISUMI	KASUGA ELECTRIC	WAGO
Product SeriesDòng sản phẩm	Terminal Block, PCN7 Series	Terminal Block, PCN Series	PX7DW Series Dsub Connector Terminal Block (terminal pitch: 7.62mm)	MWS Series (Screw Hold Mechanism with Spring)	MWI Series (Pitch between terminals 7 mm)	Interface Terminal Block, Standard Type, 7 mm Pitch	IM-DSF Dsub Female Connector Terminal Block for Control Panels
CADCAD	2D	2D		2D	2D	2D
From	3,289 VND	3,561 VND	5,370 VND	2,615 VND	4,158 VND	5,571 VND	4,689 VND
Days to ShipSố ngày giao hàng	Same day or more	6 Day(s) or more	6 Day(s) or more	Same day	Same day or more	6 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật				Connection in Boards Space-saving PLC	For Signal PLC 125 V
Connector	D-sub connector	D-sub connector	D-sub connector	D-sub connector	D-sub connector	D-sub connector	D-sub connector
Terminal Block Screw	M3	M3	M3	M3	M3	M3	-
Number of Poles(Pole)	25 ～ 37	25	37	25 ～ 37	25 ～ 37	37	15 ～ 37
Mounting Method	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	With DIN rail
Pitch Between Terminals(mm)	7	7.62	7.62	7	7	7	5
Supported equipment	PLC / I/O board	Other	PLC	PLC	PLC	Other	-
Supported equipment manufacturer	Mitsubishi Electric	-	-	-	Mitsubishi Electric	Mitsubishi Electric	-
Representative Standard	-	-	UL / CSA	-	-	-	-
Dimension vertical(mm)	40	40	64	50.7	49	45	27.1
Dimension width(mm)	100 ～ 149	109	101.21	96.5 ～ 138.5	101 ～ 150	150	48 ～ 102
Dimension depth(mm)	36	36	48	47.6	45	45	55

Loading...Tải…