(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
1,763 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
TNC SHARK
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
6 ~ 10 | - | - | Cobalt HSS | 30 ~ 35 | - | - | nano Dia | - |
From: 859,997 VND |
---|
Days to Ship: Số ngày giao hàng: 18 Day(s) |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
3-flute carbide drill capable of high-precision drilling and reamer-less processing.[Features]· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.[Applications]· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3 ~ 16 | 16 ~ 80 | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] | Carbide | 48 ~ 144 | End Mill Shank / straight shank | Available | Other | NA |
From: 1,852 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose HSS drill which is used for the widest range of applications.[Features]· Corresponds to the JIS standard.[Applications]· Usable in a wide range of applications.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.2 ~ 17.5 | 3 ~ 143 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | High-speed steel | 19 ~ 194 | straight shank | NA | Non-Coated | NA |
From: 150 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill with Bottom Blade 3-Flute AQDED3F
NACHI(FUJIKOSHI)
Coated carbide drill which achieves high efficiency machining of holes in cast materials and screw pilot holes.[Features]· Cast iron and aluminum cast parts have a high performance machined hole with H7 precision.· 3-flute cutting edge with excellent cutting balance minimizes cutting vibration during machining.· Finish processing is possible with work efficiency of 10 times or more compared to a reamer.[Applications]· 3-flute cutting edge with excellent cutting balance ideal for high-quality machining.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | 16 ~ 51 | general steel[◎] / Cast Iron[○] | Carbide | 48 ~ 108 | End Mill Shank / straight shank | Available | Other | NA |
From: 4,873 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stub Type for Stainless Steel/Soft Steel EX-SUS-GDS
OSG
Ideal for stainless steel, mild steel, copper alloy, etc.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.5 ~ 32 | 3 ~ 90 | general steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | High Vanadium HSS | 38 ~ 170 | End Mill Shank / straight shank | Available | TiN | NA |
From: 491 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.[Features]· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.· Wear resistance and chipping resistance are greatly improved.· Uses a thick core and weak torsion.· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.[Applications]· High performance machining of 50 to 70 HRC high hardness steel is possible.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 12 | 12 ~ 51 | high hardness steel[◎] | Carbide | 44 ~ 108 | End Mill Shank / straight shank | Available | Other | NA |
From: 1,726 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
High-grade powdered high-speed steel and SG coating allows this HSS drill to have the longest life possible.[Features]· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.· Achieves high-efficiency machining based on high speed and high feed.[Applications]· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 3 ~ 94 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | High-speed steel | 38 ~ 168 | End Mill Shank / straight shank | Available | TiCN | NA |
From: 597 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
HSS Straight Drill (Bagged Type)
GUHRING
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.3 ~ 13 | 3 ~ 101 | - | High-speed steel | 19 ~ 151 | - | - | - | - |
From: 151 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Cobalt Straight Shank Drill COSD
NACHI(FUJIKOSHI)
A general-purpose cobalt drill that can handle anything from steel to stainless steel.[Features]· Consistent drill bite due to the X-type thinning.· Sharpness is increased by reinforcing the drill torsion angle.· White surface less than 2.0 mm in diameter (not colored).[Applications]· Can be used for a wide range of materials, from steel to stainless steel.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.5 ~ 13 | 5 ~ 80 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cobalt HSS | 27 ~ 152 | straight shank | NA | Non-Coated | NA |
From: 230 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Drill 4D Type AD-4D
OSG
[Features]· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | 20 ~ 101 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | Carbide | 66 ~ 153 | End Mill Shank | Available | Other | NA |
From: 4,587 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 1.65 ~ 90 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | Carbide | 47 ~ 145 | End Mill Shank / straight shank | Available | Other | NA |
From: 4,225 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
PANG PANG Drill Regular Series
YG 1
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
1 ~ 20 | 8 ~ 80 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | Carbide | 38 ~ 131 | End Mill Shank | Available | TiAlN | NA |
From: 370,352 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general purpose long drill bit used over the widest range of applications.[Features]· The optimal drill bit for machining can be selected, supporting a diverse range of drill depths and an abundant range of sizes (groove length, overall length).
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
1 ~ 13 | 35 ~ 300 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | High-speed steel | 75 ~ 600 | straight shank | NA | Non-Coated | NA |
From: 545 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Regular Type for Stainless Steel/Soft Steel EX-SUS-GDR
OSG
Regular groove length series ideal for stainless steel, mild steel, aluminum alloy, copper alloy, etc.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 32 | 24 ~ 165 | general steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | High Vanadium HSS | 56 ~ 245 | End Mill Shank / straight shank | Available | TiN | NA |
From: 566 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Straight shank type coating drill for general purpose.[Features]· The surface is coated with a hard TiN film to achieve a long service life.[Applications]· Supports materials from steel to stainless steel and aluminum.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.5 ~ 13 | 6 ~ 101 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | High-speed steel | 22 ~ 151 | straight shank | Available | TiN | NA |
From: 326 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
SOMTA STRAIGHT SHANK JOBBER DRILLS
OSG
For precision drilling.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.3 ~ 37/64(inch) | 3 ~ 140 | general steel[○] | High-speed steel | 19 ~ 205 | - | Available | Steam homo | - |
From: 9,333 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
High-Speed Steel Drill, Straight Shank / Regular【1-10 Pieces Per Package】
MISUMI
Standard drills are packed for the greater value
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.2 ~ 13 | 3 ~ 101 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | High-speed steel / Cobalt HSS | 19 ~ 151 | straight shank | Available / NA | TiN | NA |
From: 640 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
ATOM
ADS standard straight shank drill long type.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.3 ~ 13 | 10 ~ 90 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | Carbide | 60 ~ 200 | straight shank | NA | Non-Coated | NA |
From: 2,000 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
[Features]· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.· The original bottom edge shape reduces the cutting resistance and achieves stable processing.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | 10 ~ 88 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | Carbide | 50 ~ 140 | End Mill Shank / straight shank | Available | Other | NA |
From: 3,589 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
YG 1
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
1 ~ 13 | 18 ~ 114 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | High-speed steel | 40 ~ 152 | - | Available | Steam homo | NA |
From: 13,954 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
NSMD-MS MUGEN Micro Coating Micro Drill Short
NS TOOL
With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.01 ~ 0.05 | 0.06 ~ 0.3 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | Carbide | 40 | End Mill Shank | Available | TiAlN | NA |
From: 7,655 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide 2-Flute Leading Drill 90° D922X
7 LEADERS
[Features]· 90° leading drill.· Prevents the chipping of the tip.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 1 ~ 40 | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Carbide | 38 ~ 130 | End Mill Shank | - | Other | - |
From: 1,860 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Drill 3D Type With Oil Hole ADO-SUS-3D
OSG
[Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 3D type with oil hole
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2.8 ~ 20 | 17 ~ 100 | general steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] | Carbide | 66 ~ 165 | End Mill Shank / straight shank | Available | Other | Available |
From: 5,034 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general purpose long drill bit used over the widest range of applications.[Features]· The optimal drill bit for machining can be selected, supporting a diverse range of drill depths and an abundant range of sizes (groove length, overall length).[Applications]· Enables selection of a drill bit suitable for the drilling depth for machining.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
7 ~ 50 | 1,000 ~ 800 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | High-speed steel | 1,200 ~ 1000 | Taper shank | NA | - | - |
From: 5,355 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ATOM
A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.3 ~ 13 | 4 ~ 50 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | Carbide | 30 ~ 100 | straight shank | NA | Non-Coated | NA |
From: 1,247 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YG 1
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
1 ~ 12.9 | 18 ~ 114 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | High-speed steel | 40 ~ 152 | - | Available | TiN | NA |
From: 60,402 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
GUHRING
Drill for small diameter hole drilling.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.05 ~ 1.92 | 0.4 ~ 13.2 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | Cobalt HSS | 25 ~ 30 | - | NA | - | NA |
From: 798 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SAITOTWISTDRILL
For deep hole drilling.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.45 ~ 7.05 | 10 ~ 90 | - | High-speed steel | 75 ~ 200 | - | NA | Non-Coated | NA |
From: 617 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
The stepped drill reduces the number of steps to achieve the high efficiency in drilling
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.4 ~ 10.3 | 21 ~ 72 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Carbide | 73 ~ 136 | straight shank | Available | TiAlN | NA |
From: 4,620 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TiN Coated High-Speed Steel Drill, Straight Shank / Regular【5-10 Pieces Per Package】
MISUMI
Carefully selected frequently used 48 sizes are assorted at low prices
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
1 ~ 13 | 12 ~ 101 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | High-speed steel | 34 ~ 151 | straight shank | Available | TiN | NA |
From: 960 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Regular Type for General Machining EX-GDR
OSG
High-versatility type capable of non-step high-speed machining of up to 4 to 5 times the diameter
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 32 | 24 ~ 165 | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[○] | Cobalt HSS | 56 ~ 245 | End Mill Shank / straight shank | Available | TiN | NA |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
A wide variety of shanks are available. Uses MCo material (cobalt high speed steel). Oxidized item.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
14.5 ~ 120 | 122 ~ 370 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | Cobalt HSS | 222 ~ 612 | Taper shank | NA | Non-Coated | NA |
From: 3,741 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stub Type for General Machining EX-GDS
OSG
Thanks to its high-rigidity groove form and stub groove length, it provides high efficiency and high precision and is ideal for pilot hole tapping and lathe processing.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
1 ~ 13 | 6 ~ 51 | general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] / Aluminum[○] | Cobalt HSS | 38 ~ 108 | End Mill Shank / straight shank | Available | TiN | NA |
From: 696 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Powder HSS for Tempered Steel, Stub Type VPH-GDS
OSG
Exerts excellent cost performance for tempered steel processing of 40 to 50 HRC
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 3 ~ 66 | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Titanium[◎] | Powder high-speed steel | 38 ~ 132 | End Mill Shank / straight shank | Available | Other | NA |
From: 884 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
H.S.S Drill Taper Shank Regular Series
YG 1
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
6 ~ 65 | 68 ~ 275 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | High-speed steel | 148 ~ 460 | - | Available | Steam homo | NA |
From: 459,015 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
High-Speed Steel Drill, Straight Shank / Long
MISUMI
A long drill that's loaded with functionality for a wide range of processing applications
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 10 | 85 ~ 185 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | High-speed steel | 125 ~ 265 | straight shank | NA | - | NA |
From: 710 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose drill used in the widest ranges of applications.[Features]· A standard drill that corresponds to the JIS standard.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
7 ~ 100 | 75 ~ 355 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | High-speed steel | - | - | - | - | - |
From: 1,560 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Counterbore with Drill for Bolts with Hexagonal Holes DCB
EIKOSHA
[Features]· 2-flute HSS type.· Counterboring for hexagon socket head bolts.· A straight shank.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.5 ~ 20 | 10 ~ 45 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | High-speed steel | 48 ~ 189 | straight shank / Taper shank | NA | - | NA |
From: 2,925 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SANDVIK
A Blade Tip Replacement Type Insert Drill With High Productivity
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
12.5 ~ 63 | 28 ~ 220 | general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | - | 91 ~ 331 | End Mill Shank / straight shank | - | - | NA |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YG 1
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 13 | 75 ~ 200 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | High-speed steel | 100 ~ 300 | - | Available | Steam homo | NA |
From: 50,872 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Ultra-Small Diameter, Carbide Stub Type for Precision Machining WX-MS-GDS
OSG
Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.19 ~ 5 | 1.2 ~ 26 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Carbide | 38 ~ 64 | End Mill Shank / straight shank | Available | Other | NA |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Drill 5D Type with Oil Hole ADO-5D
OSG
[Features]· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | 18 ~ 160 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Carbide | 70 ~ 225 | End Mill Shank | Available | Other | Available |
From: 7,080 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Drill 30D Type With Oil Hole ADO-30D
OSG
[Features]· Carbide 30D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.5 ~ 10 | 116 ~ 330 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | Carbide | 185 ~ 390 | End Mill Shank | Available | Other | Available |
From: 17,640 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
WDX Drill, for 2D Machining Depth
SUMITOMO ELECTRIC HARDMETAL
SumiDrill WDX is capable of stable drilling of a wide range of work materials including general steel, stainless steel, and aluminum alloy, thanks to its excellent cutting balance.
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
13 ~ 68 | 29 ~ 144 | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] | - | 88 ~ 246 | - | Available | TiAlN | Available |
From: 24,960 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CARMEX
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
- | - | - | - | 51 ~ 62 | - | - | - | - |
From: 1,494,513 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Hole diameter (drill diameter) D(mm) |
Groove Length L(mm) |
work material |
Tool Material Type |
Overall Length L(mm) |
Shank Type |
Coating Y/N |
Coating Type |
With/without Oil Hole |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | TNC SHARK | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | GUHRING | NACHI(FUJIKOSHI) | OSG | NACHI(FUJIKOSHI) | YG 1 | NACHI(FUJIKOSHI) | OSG | NACHI(FUJIKOSHI) | OSG | MISUMI | ATOM | OSG | YG 1 | NS TOOL | 7 LEADERS | OSG | NACHI(FUJIKOSHI) | ATOM | YG 1 | GUHRING | SAITOTWISTDRILL | MISUMI | MISUMI | OSG | OKAZAKI SEIKO | OSG | OSG | YG 1 | MISUMI | NACHI(FUJIKOSHI) | EIKOSHA | SANDVIK | YG 1 | OSG | OSG | OSG | SUMITOMO ELECTRIC HARDMETAL | CARMEX |
Product SeriesDòng sản phẩm | High-Speed Steel Drill, Straight Shank / Regular【1-10 Pieces Per Package】 | TiN Coated High-Speed Steel Drill, Straight Shank / Regular【5-10 Pieces Per Package】 | Ultra-Small Diameter, Carbide Stub Type for Precision Machining WX-MS-GDS | ||||||||||||||||||||||||||||||||||||||||||
From | 859,997 VND | 1,852 VND | 150 VND | 4,873 VND | 491 VND | 1,726 VND | 597 VND | 151 VND | 230 VND | 4,587 VND | 4,225 VND | 370,352 VND | 545 VND | 566 VND | 326 VND | 9,333 VND | 640 VND | 2,000 VND | 3,589 VND | 13,954 VND | 7,655 VND | 1,860 VND | 5,034 VND | 5,355 VND | 1,247 VND | 60,402 VND | 798 VND | 617 VND | 4,620 VND | 960 VND | 3,741 VND | 696 VND | 884 VND | 459,015 VND | 710 VND | 1,560 VND | 2,925 VND | 50,872 VND | 7,080 VND | 17,640 VND | 24,960 VND | 1,494,513 VND | |||
Days to ShipSố ngày giao hàng | 18 Day(s) | 5 Day(s) or more | Same day or more | 7 Day(s) or more | Same day or more | Same day or more | Same day or more | 7 Day(s) or more | Same day or more | 4 Day(s) or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 7 Day(s) or more | Same day or more | Same day or more | 7 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | Same day or more | 5 Day(s) or more | 7 Day(s) or more | Same day or more | Same day or more | Same day or more | 7 Day(s) or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 7 Day(s) or more | 6 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more |
Hole diameter (drill diameter) D(mm) | 6 ~ 10 | 3 ~ 16 | 0.2 ~ 17.5 | 3 ~ 12 | 0.5 ~ 32 | 2 ~ 12 | 0.5 ~ 20 | 0.3 ~ 13 | 0.5 ~ 13 | 2 ~ 20 | 0.5 ~ 20 | 1 ~ 20 | 1 ~ 13 | 2 ~ 32 | 0.5 ~ 13 | 0.3 ~ 37/64(inch) | 0.2 ~ 13 | 0.3 ~ 13 | 2 ~ 20 | 1 ~ 13 | 0.01 ~ 0.05 | 0.5 ~ 20 | 2.8 ~ 20 | 7 ~ 50 | 0.3 ~ 13 | 1 ~ 12.9 | 0.05 ~ 1.92 | 0.45 ~ 7.05 | 3.4 ~ 10.3 | 1 ~ 13 | 2 ~ 32 | 14.5 ~ 120 | 1 ~ 13 | 0.5 ~ 20 | 6 ~ 65 | 2 ~ 10 | 7 ~ 100 | 3.5 ~ 20 | 12.5 ~ 63 | 2 ~ 13 | 0.19 ~ 5 | 2 ~ 20 | 3.5 ~ 10 | 13 ~ 68 | - |
Groove Length L(mm) | - | 16 ~ 80 | 3 ~ 143 | 16 ~ 51 | 3 ~ 90 | 12 ~ 51 | 3 ~ 94 | 3 ~ 101 | 5 ~ 80 | 20 ~ 101 | 1.65 ~ 90 | 8 ~ 80 | 35 ~ 300 | 24 ~ 165 | 6 ~ 101 | 3 ~ 140 | 3 ~ 101 | 10 ~ 90 | 10 ~ 88 | 18 ~ 114 | 0.06 ~ 0.3 | 1 ~ 40 | 17 ~ 100 | 1,000 ~ 800 | 4 ~ 50 | 18 ~ 114 | 0.4 ~ 13.2 | 10 ~ 90 | 21 ~ 72 | 12 ~ 101 | 24 ~ 165 | 122 ~ 370 | 6 ~ 51 | 3 ~ 66 | 68 ~ 275 | 85 ~ 185 | 75 ~ 355 | 10 ~ 45 | 28 ~ 220 | 75 ~ 200 | 1.2 ~ 26 | 18 ~ 160 | 116 ~ 330 | 29 ~ 144 | - |
work material | - | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Cast Iron[○] | general steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | high hardness steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | - | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] | - |
Tool Material Type | Cobalt HSS | Carbide | High-speed steel | Carbide | High Vanadium HSS | Carbide | High-speed steel | High-speed steel | Cobalt HSS | Carbide | Carbide | Carbide | High-speed steel | High Vanadium HSS | High-speed steel | High-speed steel | High-speed steel / Cobalt HSS | Carbide | Carbide | High-speed steel | Carbide | Carbide | Carbide | High-speed steel | Carbide | High-speed steel | Cobalt HSS | High-speed steel | Carbide | High-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | - | High-speed steel | Carbide | Carbide | Carbide | - | - |
Overall Length L(mm) | 30 ~ 35 | 48 ~ 144 | 19 ~ 194 | 48 ~ 108 | 38 ~ 170 | 44 ~ 108 | 38 ~ 168 | 19 ~ 151 | 27 ~ 152 | 66 ~ 153 | 47 ~ 145 | 38 ~ 131 | 75 ~ 600 | 56 ~ 245 | 22 ~ 151 | 19 ~ 205 | 19 ~ 151 | 60 ~ 200 | 50 ~ 140 | 40 ~ 152 | 40 | 38 ~ 130 | 66 ~ 165 | 1,200 ~ 1000 | 30 ~ 100 | 40 ~ 152 | 25 ~ 30 | 75 ~ 200 | 73 ~ 136 | 34 ~ 151 | 56 ~ 245 | 222 ~ 612 | 38 ~ 108 | 38 ~ 132 | 148 ~ 460 | 125 ~ 265 | - | 48 ~ 189 | 91 ~ 331 | 100 ~ 300 | 38 ~ 64 | 70 ~ 225 | 185 ~ 390 | 88 ~ 246 | 51 ~ 62 |
Shank Type | - | End Mill Shank / straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | - | straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank / straight shank | straight shank | - | straight shank | straight shank | End Mill Shank / straight shank | - | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | Taper shank | straight shank | - | - | - | straight shank | straight shank | End Mill Shank / straight shank | Taper shank | End Mill Shank / straight shank | End Mill Shank / straight shank | - | straight shank | - | straight shank / Taper shank | End Mill Shank / straight shank | - | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | - | - |
Coating Y/N | - | Available | NA | Available | Available | Available | Available | - | NA | Available | Available | Available | NA | Available | Available | Available | Available / NA | NA | Available | Available | Available | - | Available | NA | NA | Available | NA | NA | Available | Available | Available | NA | Available | Available | Available | NA | - | NA | - | Available | Available | Available | Available | Available | - |
Coating Type | nano Dia | Other | Non-Coated | Other | TiN | Other | TiCN | - | Non-Coated | Other | Other | TiAlN | Non-Coated | TiN | TiN | Steam homo | TiN | Non-Coated | Other | Steam homo | TiAlN | Other | Other | - | Non-Coated | TiN | - | Non-Coated | TiAlN | TiN | TiN | Non-Coated | TiN | Other | Steam homo | - | - | - | - | Steam homo | Other | Other | Other | TiAlN | - |
With/without Oil Hole | - | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | - | Available | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | Available | Available | Available | - |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy