(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: [email protected]
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Thread-Cutting-Related Tools
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
45 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
OSG
Mainly used for tapping nuts. The threaded length and extended shank portion are designed for good workability with nuts, allowing continuous machining until the shank portion is completely filled with stacked up nuts.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter / unified / Whitworth 1UN ～ M39 0.4 ～ 40 - High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] Thread-cutting-related tool - NA Non-Coated 80 ～ 340 From: 2,230 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Tap / Drill Set【21 Pieces Per Package】
ISHIHASHI
Set of 14 Medium Hand Taps and 7 Pilot Hole Drills in Case
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - - - - - Thread-cutting-related tool - NA Non-Coated - From: 14,899 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Tap Series for Machining Center, Long Shank Type for Machining Center EX-MCT
OSG
Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter M6 ～ M24 1 ～ 3 3P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] Thread-cutting-related tool For through hole / For blind hole NA Non-Coated 120 ～ 200 From: 1,749 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】
ONISHI MANUFACTURING
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter M3 ～ M8 0.5 ～ 1.25 - High-speed steel Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] Thread-cutting-related tool For through hole NA Non-Coated 70 ～ 70/70/70 From: 490 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hexagonal Shaft Spiral Tap (for Through Hole / Blind Hole)
ONISHI MANUFACTURING
[Features]· Uses HSS that features excellent abrasion resistance.· Can be attached to impact screwdriver models capable of forward and reverse rotation to easily drill screw holes.· Cutting chips are discharged upwards due to the spiral groove
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter M3 ～ M12 0.5 ～ 1.75 - High-speed steel Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] Thread-cutting-related tool For through hole / For blind hole NA Non-Coated 70 ～ 82 From: 841 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ONISHI MANUFACTURING
[Features]· Impact drill compatible hexagonal shaft drilling tool for simultaneous pilot hole drilling and thread cutting work.[Applications]· For formation and modification of through-hole threads.· Work materials: Iron, aluminum, brass.[Features]· 1 unit enables pilot hole machining and thread cutting at the same time.· 6.35 mm hex shaft finish that supports impact drivers.· Drill cutting edge with good bite due to X-type thinning and outstanding sharpness
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter M3 ～ M6 0.5 ～ 1 - High-speed steel Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] Thread-cutting-related tool For through hole NA Non-Coated 66 ～ 69 From: 1,897 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
Set of Cobalt Spiral Taps and Cobalt Masamune Drills in Steel Case
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter - - - Cobalt HSS - Thread-cutting-related tool - NA Non-Coated - From: 21,999 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pilot Hole Check Pins for Cutting (Straight Type) CPC-S
YAMAWA MFG
5-piece set that can be used to check several types of pilot holes and pilot hole depth. High-speed tool steel is used out of consideration for abrasion resistance. Can be used for both through-holes and blind-holes.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter / unified No.10 ～ M12 0.4 ～ 64 - High-speed steel - Thread-cutting-related tool For through hole / For blind hole NA - 41.5 ～ 121 From: 1,545 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KANETEC
[Features]· Small, lightweight, and easy to carry around.· Tap guide holder that can easily perform accurate tapping operation on plane and side surface.[Applications]· For threading work.· A tool that simplifies work by facilitating tapping of pilot holes in iron plate and steel, etc., with a work stand installed with a powerful magnet.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - - - - - Thread-cutting-related tool - - - - From: 35,150 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HOZAN
A tap set with T-type handle and 3 sizes of tap.[Features]· Tap size is (M3 x 0.5/M4 x 0.7/M5 x 0.8).· All taps are medium tap types.· Threading tool set consisting of a T handle and 3 tap sizes.[Applications]· Ideal for threading.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter - - - High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] Thread-cutting-related tool For through hole / For blind hole NA - - From: 1,650 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Drill Tap Series Drill Tap DRT
OSG
Very effective in improving productivity thanks to enabling continuous tap hole drilling using the tip drill part and screw tapping processing at the tap part
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter M3 ～ M16 0.5 ～ 2 5P High-speed steel Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] Thread-cutting-related tool - NA Non-Coated 62 ～ 159 From: 3,452 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole)
ONISHI MANUFACTURING
[Features]· Can be attached to impact screwdriver models capable of forward and reverse rotation to easily drill screw holes.· Chips inside the work material are discharged forward.· Stable machining, unlikely to break.· Due to titanium coating, durability is enhanced, and it can be used on stainless steel as well
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter M3 ～ M10 0.5 ～ 1.5 - High-speed steel Stainless steel (SUS)[○] / Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] Thread-cutting-related tool For through hole Available TiN 70 From: 1,095 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Jet/spiral tap/drill set【21 Pieces Per Package】
ISHIHASHI
Set in steel case including jet taps, spiral taps, pilot hole drills, and tap wrenches
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - - - High-speed steel - Thread-cutting-related tool - NA Non-Coated - From: 20,899 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UNION TOOL
[Features]· Thread cutting tool for machining carbide alloys and hard brittle materials. (Thread mill type)· Enables direct engraving, dramatically improving efficiency and precision of discharge and grinding.· Uses a newly developed diamond coating with ultra high hardness for toughness and adhesive strength.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - M2 ～ M8 0.4 ～ 1.25 - - - Thread-cutting-related tool - Available Other 50 ～ 60 From: 21,440 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Nut Tap Series Nut Tap For Oversize O-NT
OSG
Mainly used for tapping nuts. The threaded length and extended shank portion are designed for good workability with nuts, allowing continuous machining until the shank portion is completely filled with stacked up nuts.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter M3 ～ M12 0.5 ～ 1.75 - High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] Thread-cutting-related tool - NA Non-Coated 90 ～ 170 From: 3,120 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tap Series for Machining Center, Short Type for Machining Center EX-S-MCT
OSG
Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter M6 ～ M24 1 ～ 3 3P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Thread-cutting-related tool For through hole / For blind hole NA Non-Coated 62 ～ 120 From: 832 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CeraTap Electrodeposited Diamond Tool for Grading Center ED-PNT
OSG
[Specifications]· Shape: Thread-cutting-related tool
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Other - 0.5 ～ 2 - - - Thread-cutting-related tool - - - 50 ～ 80 From: 13,910 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SKC
PLUG TAP[Features]· Automotive Plug Tap
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter M10 ～ M18 1 ～ 1.5 5P ～ 9P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] Thread-cutting-related tool - - - 100 ～ 120 From: 1,234 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SKC
A screw used for a tire valve.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - CTV5 ～ TV10 24 ～ 36 - High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] Point tap For blind hole NA Non-Coated 60 ～ 75 From: 1,974 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SKC
Thread-Cutting Die - Tap & Die Set
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - M2～10 ～ M4～10 - - - Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] Thread-cutting-related tool - - - - From: 5,263 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SKC
Equipped with a drill at the tip so that screw pilot hole drilling and tapping can be performed simultaneously.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter / Whitworth W1/2 ～ M22 0.5 ～ 40 - - Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] Thread-cutting-related tool - - - 67 ～ 230 From: 3,618 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SKC
Die-Type Screw Model
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - - - - Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] Thread-cutting-related tool - - - - From: 9,375 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SKC
Screw dedicated for bicycles.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Whitworth BC1 ～ BC9/16 20 ～ 26 - High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] Point tap For blind hole NA Non-Coated 70 ～ 110 From: 2,138 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
H & H
Uses high-carbon steel material with excellent durability. For professional use.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - - - - - Thread-cutting-related tool - NA Non-Coated - From: 2,190 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hex Shaft Electric Screwdriver Tap
H & H
Insert with one touch into the hex shaft bit of battery screwdrivers or impact drivers to form clean female threads.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - - - - - Thread-cutting-related tool For through hole NA Non-Coated - From: 835 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hexagonal Shank Combination Tap Drill
SK 11
Thread-cutting tool that can be used in tapping work for iron plate, non-ferrous metals, resin, etc.[Features]· A useful electric tapping drill that can tap pilot holes at the same time as thread cutting.[Applications]· For tapping of iron plate, non-ferrous metals, resin, etc.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - M3 ～ M10 0.5 ～ 1.5 - - - - - - - - From: 988 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
This type is equipped with a drill at the tip so that screw pilot hole drilling and tapping can be performed simultaneously.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter M3 ～ M12 0.5 ～ 1.75 - - - Thread-cutting-related tool - Available Other 55 ～ 110 From: 3,352 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Cobalt jet/spiral type/drill set【21 Pieces Per Package】
ISHIHASHI
Set of Cobalt Jet Taps, Cobalt Spiral Taps, and Cobalt Masamune Drills in Steel Case
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter - - - Cobalt HSS - Thread-cutting-related tool - NA Non-Coated - From: 24,135 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Mid Tap / Drill Set for Electric Construction【26 Pieces Per Package】
ISHIHASHI
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - - - - - Thread-cutting-related tool - NA Non-Coated - From: 10,137 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Tap / Drill Set【21 Pieces Per Package】
ISHIHASHI
Set in steel case including spiral taps, pilot hole drills, and tap wrenches
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - - - High-speed steel - Thread-cutting-related tool - NA Non-Coated - From: 23,899 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Jet tap/drill set【21 Pieces Per Package】
ISHIHASHI
Set in steel case including jet taps, pilot hole drills, and tap wrenches
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - - - - - Thread-cutting-related tool - NA Non-Coated - From: 20,899 VND Days to Ship: Số ngày giao hàng: 15 Day(s) or more
15 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tap/Drill - One Pack【3 Pieces Per Package】
ISHIHASHI
3-Piece Set of Hand Tap x 2/Straight Drill x 1
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter / Whitworth W1/2 ～ M12 0.5 ～ 20 - - - Thread-cutting-related tool - NA Non-Coated - From: 1,077 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Simple Thread Measuring Tool Dual Type (for 6H) SMTD
YAMAWA MFG
"Simple measurement of female thread "and "flat cutting of female thread" can be performed consecutively. Adopts "chamfering grooves" on the straight part for removing "chips" and "debris".
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter M2.5 0.45 - High-speed steel - Thread-cutting-related tool - NA - 46 From: 11,660 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hole Check Pin for Cutting (Straight Type) CPC-T
YAMAWA MFG
Provides simple check of pilot hole diameter. Uses high speed tool steel out of consideration for wear resistance. Can be used for either through holes or blind holes with margin.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter M2 ～ M12 0.5 ～ 0.8 - High-speed steel - Thread-cutting-related tool - NA - 42 ～ 110 From: 999 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NEW STRONG
[Specifications]· Shape: Thread-cutting-related tool· Usage: (1) Attach to workpiece using magnets. (2) Set compatible tap, rotate the handle to cut the screw.[Applications] (1) Cases where workpieces are large and mechanical machining is not possible. (2) Manual operation types not requiring electricity and thus enabling work outdoors. (3) Applicable tap: M3-M12
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - - - - - - - - - - From: 34,480 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pilot Hole Check Pin for Roll Taps - Straight Type CPR-S
YAMAWA MFG
[Features]· (Straight type) Roll tap check pin that can be used to check several types of pilot hole diameters and pilot hole depth.· High-speed tool steel is used out of consideration for abrasion resistance.· Can be used for blind holes.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter / unified No.10 ～ 7/16 56 ～ 64 - High-speed steel - Thread-cutting-related tool For blind hole NA Non-Coated 41.5 ～ 121 From: 1,545 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pilot Hole Check Pin for Roll Taps - Taper Type CPR-T
YAMAWA MFG
[Features]· (Taper type) Roll tap pilot hole check pin that can be used to easily check pilot hole diameters with the 1 tool.· High-speed tool steel is used out of consideration for abrasion resistance.· Can be used for both through-holes and blind-holes if the latter has ample room.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter / unified No.10 ～ 7/16 56 ～ 64 - High-speed steel - Thread-cutting-related tool For through hole / For blind hole NA Non-Coated 59.5 ～ 61.5 From: 999 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
[Features]· Tap holder used to extend the tap length for use.· Can be used to make I series taps (ISP/IPO/IHT) longer.· Alloy steel.
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - 150 - - - Thread-cutting-related tool - NA Non-Coated 103 ～ 127 From: 3,508,737 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pilot Hole Check Pin for R-Y CPR-Y
YAMAWA MFG
[Features]· Check pin for roll tap R-Y pilot hole diameter management.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) Meter - - - - - Thread-cutting-related tool - - - - From: 430 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SK 11
A set of taps that are ideal for precision threading work and for creating blind holes. [Features]· A set consisting of taps for rough, medium and finishing work.· As tapping is done by hand (by rotating), you can set the threading length and stop position to any point you like, regardless of the thickness of the work material.· Threading is done in 3 steps—roughing, medium and finishing—allowing you to finish more easily with higher precision. [Applications]· Threading (tapping) for general iron and steel.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - - - SKS Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] Thread-cutting-related tool - - - - From: 696 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SK 11
Tap for threading general iron and steel. [Features]· As tapping is done by hand (by rotating), you can set the threading length and stop position to any point you like.· Makes threading work easy regardless of the thickness of the work material. [Applications]· Threading (tapping) for general iron and steel.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - - - - SKS Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] Thread-cutting-related tool - - - - From: 306 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MITSUTOMO Hex-Shank Tap With Guide
MITSUTOMO
[Features] · A convenient handle tap for accurate right-angle threading without bending or breakage. [Applications] · Tapping non-ferrous metals, resin, etc. For through-holes
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - M3 ～ M10 0.5 ～ 1.5 - - - - - - - - From: 979 VND Days to Ship: Số ngày giao hàng: 12 Day(s) or more
12 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MITSUTOMO Hex-Shank Tap With Guide And Pilot Hole Drill
MITSUTOMO
[Features] · Includes a guide for tapping perpendicular to the workpiece without bending. [Applications] · For tapping iron plates, non-ferrous metals, resin, etc.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - M3 ～ M10 0.5 ～ 1.5 - - - - - - - - From: 1,173 VND Days to Ship: Số ngày giao hàng: 12 Day(s) or more
12 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MITSUTOMO Hex-Shank Point Tap With Pilot Hole Drill
MITSUTOMO
[Features] · Can be used to tap into iron plates, non-ferrous metals and resin.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - M3 ～ M10 0.5 ～ 1.5 - - - - - - - - From: 979 VND Days to Ship: Số ngày giao hàng: 12 Day(s) or more
12 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MITSUTOMO Hex-Shank Point Tap (Base Material: HSS)
MITSUTOMO
[Features] · The cutting edge has been thinned. [Applications] · For tapping iron plates, non-ferrous metals, resin, etc.
- Volume Discount
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Coating Type Overall Length (L)(mm) - M3 ～ M10 0.5 ～ 1.5 - - - - - - - - From: 800 VND Days to Ship: Số ngày giao hàng: 10 Day(s) or more
10 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.         | You can add up to 6 items per a category to the compare list.         | You can add up to 6 items per a category to the compare list.        | You can add up to 6 items per a category to the compare list.        | You can add up to 6 items per a category to the compare list.        | You can add up to 6 items per a category to the compare list.        | |
| BrandNhãn hiệu | OSG | ISHIHASHI | OSG | ONISHI MANUFACTURING | ONISHI MANUFACTURING | ONISHI MANUFACTURING | ISHIHASHI | YAMAWA MFG | KANETEC | HOZAN | OSG | ONISHI MANUFACTURING | ISHIHASHI | UNION TOOL | OSG | OSG | OSG | SKC | SKC | SKC | SKC | SKC | SKC | H & H | H & H | SK 11 | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | YAMAWA MFG | YAMAWA MFG | NEW STRONG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | SK 11 | SK 11 | MITSUTOMO | MITSUTOMO | MITSUTOMO | MITSUTOMO |
| Product SeriesDòng sản phẩm | Tap Series for Machining Center, Long Shank Type for Machining Center EX-MCT | Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】 | Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole) | Tap Series for Machining Center, Short Type for Machining Center EX-S-MCT | CeraTap Electrodeposited Diamond Tool for Grading Center ED-PNT | Mid Tap / Drill Set for Electric Construction【26 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||
| From | 2,230 VND | 14,899 VND | 1,749 VND | 490 VND | 841 VND | 1,897 VND | 21,999 VND | 1,545 VND | 35,150 VND | 1,650 VND | 3,452 VND | 1,095 VND | 20,899 VND | 21,440 VND | 3,120 VND | 832 VND | 13,910 VND | 1,234 VND | 1,974 VND | 5,263 VND | 3,618 VND | 9,375 VND | 2,138 VND | 2,190 VND | 835 VND | 988 VND | 3,352 VND | 24,135 VND | 10,137 VND | 23,899 VND | 20,899 VND | 1,077 VND | 11,660 VND | 999 VND | 34,480 VND | 1,545 VND | 999 VND | 3,508,737 VND | 430 VND | 696 VND | 306 VND | 979 VND | 1,173 VND | 979 VND | 800 VND |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | Same day | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | Same day | 6 Day(s) or more | Same day or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 15 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more |
| Screw Types | Meter / unified / Whitworth | - | Meter | Meter | Meter | Meter | Meter | Meter / unified | - | Meter | Meter | Meter | - | - | Meter | Meter | Other | Meter | - | - | Meter / Whitworth | - | Whitworth | - | - | - | Meter | Meter | - | - | - | Meter / Whitworth | Meter | Meter | - | Meter / unified | Meter / unified | - | Meter | - | - | - | - | - | - |
| Screw size (Nominal) | 1UN ～ M39 | - | M6 ～ M24 | M3 ～ M8 | M3 ～ M12 | M3 ～ M6 | - | No.10 ～ M12 | - | - | M3 ～ M16 | M3 ～ M10 | - | M2 ～ M8 | M3 ～ M12 | M6 ～ M24 | - | M10 ～ M18 | CTV5 ～ TV10 | M2～10 ～ M4～10 | W1/2 ～ M22 | - | BC1 ～ BC9/16 | - | - | M3 ～ M10 | M3 ～ M12 | - | - | - | - | W1/2 ～ M12 | M2.5 | M2 ～ M12 | - | No.10 ～ 7/16 | No.10 ～ 7/16 | - | - | - | - | M3 ～ M10 | M3 ～ M10 | M3 ～ M10 | M3 ～ M10 |
| Pitch (P), Number of Threading(mm) | 0.4 ～ 40 | - | 1 ～ 3 | 0.5 ～ 1.25 | 0.5 ～ 1.75 | 0.5 ～ 1 | - | 0.4 ～ 64 | - | - | 0.5 ～ 2 | 0.5 ～ 1.5 | - | 0.4 ～ 1.25 | 0.5 ～ 1.75 | 1 ～ 3 | 0.5 ～ 2 | 1 ～ 1.5 | 24 ～ 36 | - | 0.5 ～ 40 | - | 20 ～ 26 | - | - | 0.5 ～ 1.5 | 0.5 ～ 1.75 | - | - | - | - | 0.5 ～ 20 | 0.45 | 0.5 ～ 0.8 | - | 56 ～ 64 | 56 ～ 64 | 150 | - | - | - | 0.5 ～ 1.5 | 0.5 ～ 1.5 | 0.5 ～ 1.5 | 0.5 ～ 1.5 |
| Chamfer threads (Lcf) | - | - | 3P | - | - | - | - | - | - | - | 5P | - | - | - | - | 3P | - | 5P ～ 9P | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Material Type | High-speed steel | - | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | High-speed steel | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel | - | High-speed steel | Vanadium High-Speed Steel | - | High-speed steel | High-speed steel | - | - | - | High-speed steel | - | - | - | - | Cobalt HSS | - | High-speed steel | - | - | High-speed steel | High-speed steel | - | High-speed steel | High-speed steel | - | - | SKS | SKS | - | - | - | - |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Stainless steel (SUS)[○] / Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - | - | - | - |
| Tap Type | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Point tap | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Point tap | Thread-cutting-related tool | Thread-cutting-related tool | - | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | - | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | - | - | - | - |
| Hole type | - | - | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole | - | For through hole / For blind hole | - | For through hole / For blind hole | - | For through hole | - | - | - | For through hole / For blind hole | - | - | For blind hole | - | - | - | For blind hole | - | For through hole | - | - | - | - | - | - | - | - | - | - | For blind hole | For through hole / For blind hole | - | - | - | - | - | - | - | - |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | Available | NA | Available | NA | NA | - | - | NA | - | - | - | NA | NA | NA | - | Available | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | - | - | - | - | - | - | - |
| Coating Type | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | - | Non-Coated | TiN | Non-Coated | Other | Non-Coated | Non-Coated | - | - | Non-Coated | - | - | - | Non-Coated | Non-Coated | Non-Coated | - | Other | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | - | Non-Coated | Non-Coated | Non-Coated | - | - | - | - | - | - | - |
| Overall Length (L)(mm) | 80 ～ 340 | - | 120 ～ 200 | 70 ～ 70/70/70 | 70 ～ 82 | 66 ～ 69 | - | 41.5 ～ 121 | - | - | 62 ～ 159 | 70 | - | 50 ～ 60 | 90 ～ 170 | 62 ～ 120 | 50 ～ 80 | 100 ～ 120 | 60 ～ 75 | - | 67 ～ 230 | - | 70 ～ 110 | - | - | - | 55 ～ 110 | - | - | - | - | - | 46 | 42 ～ 110 | - | 41.5 ～ 121 | 59.5 ～ 61.5 | 103 ～ 127 | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Screw Types
-
Screw size (Nominal)
- No.10
- No.12
- No.2
- No.3
- No.4
- No.5
- No.6
- No.8
- 1UN
- BC1
- W1
- 1/2
- 1/2UN
- W1/2
- 1/4
- 1/4UN
- W1/4
- W1/8
- BC1.37
- M2
- M2～10
- M2.3
- M2.5
- M2.6
- M3
- 3/4UN
- W3/4
- 3/8
- 3/8UN
- BC3/8
- W3/8
- M3～12
- M3.5
- M4
- M4～10
- M4.5
- CTV5
- M5
- TV5
- 5/8UN
- W5/8
- 5/16
- 5/16UN
- BC5/16
- W5/16
- W5/32
- M6
- No6UN
- M7
- 7/8UN
- W7/8
- 7/16
- 7/16UN
- W7/16
- CTV8
- M8
- No8UN
- TV8
- M9
- BC9/16
- W9/16
- M10
- No10UN
- TV10
- M11
- M12
- M]12
- M13
- M14
- M16
- M18
- M20
- M22
- M24
- M27
- M30
- M33
- M36
- M39
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy